Daikin REYQ8-48PY1B - Page 257

SiBE37-701_B Troubleshooting by Remote Controller
Troubleshooting 246
Normal status
Enters inspection mode from normal
status when the INSPECTION/
TEST button is pressed
1 Press INSPECTION/TEST button
If no button is
pressed for 1 minute,
equipment returns to
normal status.
When MODE selector
button is pressed or no
button is pressed for 1
minute, equipment returns
to normal status.
If no button is pressed for
1 minute, equipment
returns to normal status.
3
Press
MODE
selector
button.
5 Press MODE selector button.