Daikin REYQ8-48PY1B - Page 452

Option List SiBE37-701_B
441 Appendix
Building Management System
Notes:
★
1. BACnet
®
is a registered trademark of American Society of Heating, Refrigerating and Air-
Conditioning Engineers (ASHRAE).
★
2. LonWorks
®
‚ is a registered trade mark of Echelon Corporation.
★
3. Installation box for adaptor must be procured on site.
No. Part name Model No. Function
1
intelligent Touch
Controller
Basic
Hardware
intelligent Touch
Controller
DCS601C51
• Air-Conditioning management system that can be controlled by a
compact all-in-one unit.
1-1
Option
Hardware DIII-NET plus adaptor DCS601A52 • Additional 64 groups (10 outdoor units) is possible.
1-2
Software
P. P. D. DCS002C51 • P. P. D.: Power Proportional Distribution function
1-3 Web DCS004A51
• Monitors and controls the air conditioning system using the Internet
and a Web browser application on a PC.
1-4 Electrical box with earth terminal (4 blocks) KJB411A • Wall embedded switch box.
2
intelligent
Manager III
Basic
Hardware
Number of
units to be
connected
128 units DAM602B52
• Air conditioner management system that can be controlled by
personal computers.
256 units DAM602B51
512 units DAM602B51×2
768 units DAM602B51×3
1024 units DAM602B51×4
2-1
Option Software
P.P.D. DAM002A51 • Power Proportional Distribution function
2-2 Web DAM004A51
• Monitors and controls the air conditioning system using the Internet
and a Web browser application on a PC.
2-3 Eco DAM003A51 • ECO (Energy saving functions.)
2-4 Optional DIII Ai unit DAM101A51 • External temperature sensor for intelligent Manager III.
2-5 Di unit DEC101B51 • Input contacts: 16 points
2-6 Dio unit DEC102B51 • Input contacts: 8 points; output contacts: 4 points
3
Communication line
*1 Interface for use in BACnet
®
DMS502B51
• Interface unit to allow communications between VRV and BMS.
Operation and monitoring of air-conditioning systems through
BACnet
®
communication.
3-1 Optional DIII board DAM411B51
• Expansion kit, installed on DMS502B51, to provide 2 more DIII-NET
communication ports. Not usable independently.
3-2 Optional Di board DAM412B51
• Expansion kit, installed on DMS502B51, to provide 16 more
wattmeter pulse input points. Not usable independently.
4 *2 Interface for use in LonWorks
®
DMS504B51
• Interface unit to allow communications between VRV and BMS.
Operation and monitoring of air-conditioning systems through
LonWorks
®
communication.
5
Contact/analog signal
Parallel interface
Basic unit
DPF201A51
• Enables ON/OFF command, operation and display of malfunction;
can be used in combination with up to 4 units.
6
Temperature
measurement units
DPF201A52 • Enables temperature measurement output for 4 groups; 0-5VDC.
7
Temperature
setting units
DPF201A53 • Enables temperature setting input for 16 groups; 0-5VDC.
8
Unification adaptor for
computerized control
★DCS302A52
• Interface between the central monitoring board and central control
units.
[