Need help?Do you have a question about the Daikin RKS60B2VMB and is the answer not in the manual?
Remove the 4 screws and lift the top panel.
Remove the 4 screws and remove the discharge grille.
Remove the 6 screws of the front panel.
Push the front panel and lift the shield plate to unfasten the hooks.
Unfasten the left side hooks, then the right side hook and remove the front panel.
Remove the screw of the stop valve cover and pull it downward.
Remove the screw of the shield plate and unfasten hooks to remove the electrical box cover.
Disconnect the connector for the fan motor [S70].
Remove the nut of the outdoor fan.
Remove the lower and upper screws from the fan motor.
Release the fan motor lead wire from the 2 hooks and pull the fan motor out.
Remove the 4 screws and lift the top panel.
Remove the 4 screws and remove the discharge grille.
Remove the 6 screws of the front panel.
Push the front panel and lift the shield plate to unfasten the hooks.
Unfasten the left side hooks, then the right side hook and remove the front panel.
Remove the screw of the stop valve cover and pull it downward.
Remove the screw of the shield plate and unfasten hooks to remove the electrical box cover.
Disconnect the connector for the fan motor [S70].
Remove the nut of the outdoor fan.
Remove the lower and upper screws from the fan motor.
Release the fan motor lead wire from the 2 hooks and pull the fan motor out.
General| Brand | Daikin |
|---|---|
| Model | RKS60B2VMB |
| Category | Air Conditioner |
| Language | English |
To Next Page