EasyManua.ls Logo

Daikin RX09RMVJU9 User Manual

Daikin RX09RMVJU9
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Service
Manual
Inverter Pair
Duct Connected Type
FDMQ-R Series
SiUS071735EB
[Applied Models]
Inverter Pair : Heat Pump

Table of Contents

Other manuals for Daikin RX09RMVJU9

Question and Answer IconNeed help?

Do you have a question about the Daikin RX09RMVJU9 and is the answer not in the manual?

Daikin RX09RMVJU9 Specifications

General IconGeneral
BrandDaikin
ModelRX09RMVJU9
CategoryInverter
LanguageEnglish

Summary

Part 6 Service Diagnosis

1. General Problem Symptoms and Check Items

Lists common symptoms and initial checks for troubleshooting.

4.1 Error Codes and Description

Lists all error codes, their descriptions, and corresponding reference pages.

4.2 Indoor Unit PCB Abnormality

Troubleshooting steps for errors related to the indoor unit's main control PCB.

4.14 Outdoor Unit PCB Abnormality

Troubleshooting steps for errors related to the outdoor unit's main control PCB.

2. Troubleshooting with LED

Guides troubleshooting based on LED indicators on indoor and outdoor units.

3. Service Diagnosis

Provides diagnostic procedures for wired and wireless remote controllers.

4.4 Indoor Fan Motor (DC Motor) or Related Abnormality

Diagnosis and resolution for issues with the indoor DC fan motor.

4.5 Indoor Fan PCB Abnormality

Troubleshooting steps for errors related to the indoor fan's control PCB.

4.7 Thermistor or Related Abnormality

Guides on checking and diagnosing thermistor faults in the indoor unit.

4.9 Signal Transmission Error (Between Indoor Unit and Remote Controller)

Troubleshooting steps for communication errors between indoor units and remote controllers.

4.12 Signal Transmission Error (Between Indoor Unit and Outdoor Unit)

Resolves communication errors between indoor and outdoor units.

4.15 OL Activation (Compressor Overload)

Addresses compressor overload conditions and their causes.

4.16 OL Activation or HPS Activation (Compressor Overload/High Pressure Switch)

Troubleshoots compressor overload and high-pressure switch activation.

4. Troubleshooting

Details troubleshooting steps for various error codes and system abnormalities.

1. Safety Cautions

1.1 Warnings and Cautions Regarding Safety of Workers

Essential safety warnings and precautions for service personnel.

1.2 Warnings and Cautions Regarding Safety of Users

Safety guidelines and precautions for end-users of the equipment.

Part 4 Functions and Control

1. Main Functions

Describes core operational functions like temperature and fan speed control.

2.12 Malfunctions

Lists and explains system malfunctions and errors detected by sensors and circuits.

2. Control Specification

Explains system control logic, modes, and specifications.

5. Check

5.1 Thermistor Resistance Check

Explains how to measure thermistor resistance to diagnose faults.

5.4 Electronic Expansion Valve Check

Details the procedure for checking the electronic expansion valve's continuity and operation.

5.7 Inverter Analyzer Check

Explains how to use an inverter analyzer to diagnose compressor startup or overcurrent issues.

5.13 Power Module Check

Details how to test the power module for resistance to diagnose failures.

5.2 Indoor Fan Motor Connector Check

Provides steps to check the indoor fan motor connector for proper resistance.

5.3 Power Supply Waveforms Check

Guides on checking power supply waveforms for sine wave and disturbances.

Related product manuals