Why is my Daikin RXH35CAVMB Air Conditioner outdoor unit leaking water?
In HEAT mode, the frost on the outdoor unit melts into water or steam during defrost operation. In COOL or DRY mode, moisture in the air condenses into water on the cool surface of the outdoor unit piping and drips.
Why does my Daikin Air Conditioner smell?
The Daikin Air Conditioner may emit odors because smells from the room, furniture, or cigarettes have been absorbed into the unit and are being discharged with the airflow. It is recommended to have the indoor unit cleaned by a technician. Consult the service shop where you bought the air conditioner.
What to do if my Daikin Air Conditioner heating stops suddenly?
The system is likely removing frost from the outdoor unit. You should wait for about 3 to 8 minutes.
Why doesn't hot air come out immediately from my Daikin RXH35CAVMB when heating?
You should wait for 1 to 4 minutes. The system is designed to start discharging air only after it has reached a certain temperature.
Why my Daikin RXH35CAVMB Air Conditioner does not start immediately?
If the ON/OFF button was pressed soon after operation was stopped, or if the mode was reselected, you should wait for about 3 minutes.
What to do if my Daikin RXH35CAVMB operation stopped suddenly?
For system protection, the air conditioner may stop operating due to a sudden large voltage fluctuation. It will automatically resume operation in about 3 minutes.
Why is the Daikin Air Conditioner outdoor fan running when it's off?
After operation is stopped, the outdoor fan may continue rotating for another 60 seconds for system protection. Also, when the outdoor temperature is very high, the outdoor fan might start rotating for system protection even when the air conditioner is not in operation.
Why does mist come out of my Daikin RXH35CAVMB?
This happens when the air in the room is cooled into mist by the cold air flow during cooling operation.
Provides detailed technical specifications for the air conditioning units.
Specifies technical details for cooling-only models.
Specifies technical details for heat pump models.
Explains core operational functions like frequency principles and airflow.
Outlines control specifications for various operating modes and conditions.
Essential safety guidelines for handling and operating the unit.
Provides solutions for common operational problems and malfunctions.
Lists common symptoms and their corresponding troubleshooting steps.
Detailed troubleshooting guide for various error codes and malfunctions.
A table of error codes and their meanings for diagnosis.
Troubleshooting steps for indoor unit PCB issues.
Diagnosing and resolving freeze-up or high-pressure issues.
Troubleshooting fan motor problems.
Diagnosing indoor unit thermistor issues.
Troubleshooting communication errors between units.
Addressing compressor overload issues.
Steps for diagnosing and resolving compressor lock errors.
Troubleshooting DC fan lock errors.
Diagnosing and resolving input over-current issues.
Troubleshooting four-way valve problems.
Addressing discharge pipe temperature control issues.
Diagnosing high-pressure issues during cooling.
Troubleshooting position sensor errors.
Diagnosing DC voltage/current sensor abnormalities.
Troubleshooting outdoor unit thermistor issues.
Addressing electrical box temperature rise issues.
Diagnosing radiation fin temperature rise.
Troubleshooting output over-current detection.
Diagnosing and resolving insufficient gas conditions.
Troubleshooting over-voltage detection errors.
General| Category | Air Conditioner |
|---|---|
| Capacity | 3.5 kW |
| Cooling Capacity | 3.5 kW |
| Heating Capacity | 4.0 kW |
| Refrigerant | R32 |
| Power Supply | 220-240 V, 50 Hz |
To Next Page
