Why is my Daikin RXM50R2V1B Air Conditioner not heating or cooling as expected?
Your Daikin Air Conditioner might not be heating or cooling as expected due to a few reasons. It could be due to incorrect connection of the electrical wires, in which case you should connect the electrical wires correctly. Another potential cause is gas leakage, so check for any gas leakage.
What to do if there's water leakage from my Daikin RXM50R2V1B Air Conditioner?
If you notice water leakage from your Daikin Air Conditioner, it could be due to incomplete thermal insulation of the gas and liquid piping, or the indoor portions of the drain hose extension. Ensure the thermal insulation of the piping and the drain hose is complete. Another cause might be improperly connected drainage, so secure the drainage.
What to do if I suspect electrical leakage from my Daikin RXM50R2V1B Air Conditioner?
If you suspect electrical leakage from your Daikin Air Conditioner, it's likely that the unit is not earthed correctly. Check and correct the connection of the earth wiring.
What to do if my Daikin RXM50R2V1B Air Conditioner unit does not function or shows burn damage?
If your Daikin Air Conditioner unit does not function or shows burn damage, this may be because the wiring was not performed in accordance with the specifications. Correct the wiring.
General| Model | RXM50R2V1B |
|---|---|
| Category | Air Conditioner |
| Type | Split System |
| Cooling Capacity | 5.0 kW |
| Heating Capacity | 5.8 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Seasonal Energy Efficiency Ratio (SEER) | 6.1 |
| Refrigerant | R32 |
| Outdoor Unit Noise Level | 48 dB(A) |
| Power Supply | 220-240 V, 50 Hz |
| Indoor Unit Noise Level | 25 dB(A) |
Provides general safety instructions and precautions for authorized installers.
Details necessary conditions and restrictions for selecting an outdoor unit installation site.
Covers safety precautions related to R32 refrigerant, including flammability risks.
Critical safety measures for electrical connections and components.
Guidance on selecting and preparing the location for outdoor unit installation.
Instructions and precautions for securely mounting the outdoor unit.
Requirements for refrigerant piping material, diameter, and temper grade.
Detailed steps and precautions for connecting refrigerant piping securely.
Instructions and warnings for adding refrigerant to the system.
Step-by-step instructions for connecting power supply and interconnection cables.
To Next Page
