Outer Panels Si001423E
2 Removal Procedure
1. Outer Panels
Warning
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step Procedure Points
1. Remove the suction grille.
1
2
Pull out the bottom of
the suction grille.
Unfasten the 3 hooks
on the top of the suction
grille and remove it.
Suction grille has other 6
hooks. When reassembling,
insert the 6 hooks into the
clearances of the outdoor
heat exchanger fins.
2. Remove the outer panels.
1
Remove the 9 screws
and remove the top
panel.
Hook
Suction grille
(R21742)
Hook
Hook
(R21743)
Top panel
(R21744)
To Next Page
