To Next PageTo Next PageHow to prepare my Daikin RXN35MV1B9 Air Conditioner for long-term storage?
When you are not planning to use your Daikin Air Conditioner for an extended period, take these steps: Operate the unit for 2 hours in cool mode at 30°C/86°F. Then, remove the power plug and, if applicable, cut off the independent electric circuit for the unit. Finally, remove the batteries from the remote control.
Covers warnings, cautions, and important notices for safe installation and operation.
Details on refrigerant type, GWP, and handling requirements for environmental compliance.
Details maximum piping lengths, elevation differences, pipe sizes, and additional refrigerant charge.
Covers cutting, burring, flaring techniques, and torque specifications for pipe connections.
Table of specifications for power supply/interconnection cables and safety tips for wiring.
Essential safety measures and precautions when working with the R410A refrigerant.
Step-by-step guide for vacuuming the system and charging refrigerant using specific tools.
General| Category | Air Conditioner |
|---|---|
| Model | RXN35MV1B9 |
| Type | Split System |
| Cooling Capacity | 3.5 kW |
| Heating Capacity | 4.0 kW |
| Energy Efficiency Ratio (Cooling) | 3.21 |
| Refrigerant | R32 |
| Outdoor Unit Noise Level | 48 dB(A) |
| Indoor Unit Weight | 9 kg |
| Operating Temperature Range (Heating) | -15 to 24 °C |
| Power Supply | 220-240V, 50Hz |
| Operating Temperature Range (Cooling) | -10 to 46 °C |
