Need help?Do you have a question about the Daikin RXP25N5V1B9 and is the answer not in the manual?
General| Model | RXP25N5V1B9 |
|---|---|
| Cooling Capacity | 2.5 kW |
| Heating Capacity | 3.2 kW |
| Energy Efficiency Rating | A++ |
| Refrigerant | R32 |
| SEER | 6.1 |
| Energy Efficiency Class (Cooling) | A++ |
| Energy Efficiency Ratio (Heating) | 4.0 |
| Type | Split System |
| Sound Power Level (Cooling) | 49 dB(A) |
| Sound Pressure Level (Cooling) | 19 dBA |
| Power Supply | 220-240V / 50Hz |
| Noise Level (Indoor Unit) | 19 dBA |
Details the scope and purpose of this installation manual.
Safety instructions for installing the unit.
Details regarding the outdoor unit.
Instructions for unpacking the outdoor unit.
Guidelines for preparing the installation location for the outdoor unit.
Specifies spacing requirements for outdoor unit installation.
Special considerations for installing the unit in cold weather conditions.
Procedure for removing accessories from the outdoor unit.
Steps for mounting the outdoor unit.
Instructions for preparing the mounting structure for the outdoor unit.
Steps for physically installing the outdoor unit.
Ensuring proper drainage for the outdoor unit.
Measures to secure the outdoor unit against tilting.
Requirements for preparing refrigerant piping.
Details on material, diameter, and thickness for refrigerant pipes.
Maximum allowable lengths and height differences for refrigerant pipes.
Specifications for insulating refrigerant piping.
Procedure for connecting refrigerant piping.
Safety warnings and precautions for connecting refrigerant piping.
Specific steps to connect piping to the outdoor unit.
How to check the refrigerant piping.
Procedure for checking refrigerant piping for leaks.
Instructions for performing vacuum drying on the system.
Information on when additional or complete refrigerant charging is needed.
How to calculate the required additional refrigerant based on piping length.
Determining the total refrigerant needed for a complete recharge.
Steps for charging additional refrigerant into the system.
Instructions for applying the refrigerant label.
Details on required wiring components and specifications.
Step-by-step guide for connecting electrical wiring to the unit.
Final steps to complete the outdoor unit installation.
Instructions for closing the outdoor unit cover.
Items to check before starting the commissioning process.
Items to check while performing the commissioning.
Procedure for conducting a test run of the unit.
Instructions for starting up the outdoor unit.
Diagnosing faults using the LED indicators on the outdoor unit PCB.
Provides technical data and wiring diagrams for the unit.
Legend explaining the symbols used in the wiring diagrams.
Diagrams illustrating the piping configurations for the unit.
Detailed piping diagram for the outdoor unit.
To Next Page