EasyManua.ls Logo

Daikin RY100LUY1 User Manual

Daikin RY100LUY1
501 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Pocket
Manual
Service Diagnosis
Si20 - 701_B

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Daikin RY100LUY1 and is the answer not in the manual?

Daikin RY100LUY1 Specifications

General IconGeneral
BrandDaikin
ModelRY100LUY1
CategoryAir Conditioner
LanguageEnglish

Summary

Pocket Manual

Service Diagnosis

Main section for diagnosing system issues and faults.

Symptom-based Troubleshooting

2.1 Overview

General overview of symptoms and troubleshooting measures.

2.2 Equipment does not Operate

Troubleshooting steps for when the equipment fails to operate.

2.4 Cooling / Heating Operation Starts but Stops Immediately

Remedies for operations that start and then stop abruptly.

2.6 Equipment Operates but does not Provide Cooling

Steps to fix inadequate cooling performance.

2.9 Equipment Produces Loud Noise or Vibration

Identifying and resolving causes of excessive noise or vibration.

Troubleshooting by Remote Controller

3.1 Procedure of Self-diagnosis by Remote Controller

Details the self-diagnosis procedure using the remote controller.

3.2 Error Codes and Description

Lists error codes, their descriptions, and model applicability for indoor units.

3.5 A1 Indoor Unit PCB Abnormality

Diagnosing PCB abnormalities in the indoor unit, indicated by error code A1.

3.6 A3 Drain Water Level System Abnormality

Troubleshooting abnormal drain water levels indicated by error code A3.

3.11 A9 Electronic Expansion Valve Coil (Y1E) Abnormality

Diagnosing abnormalities in the electronic expansion valve coil (Y1E).

3.15 C1 Transmission Error (between Indoor Unit PCB and Fan PCB)

Troubleshooting transmission errors between indoor unit PCB and fan PCB.

3.21 E0 Actuation of Safety Device

Troubleshooting related to the actuation of safety devices.

3.23 E1 Outdoor Unit PCB Abnormality

Troubleshooting abnormalities with the outdoor unit PCB, indicated by error code E1.

Related product manuals