Need help?Do you have a question about the Daikin RZQ71KBV1 and is the answer not in the manual?
General| Category | Heat Pump |
|---|---|
| Model | RZQ71KBV1 |
| Cooling Capacity | 7.1 kW |
| Heating Capacity | 8.0 kW |
| Outdoor Unit Noise Level | 50 dB(A) |
| Weight (Indoor Unit) | 12 kg |
| Refrigerant | R32 |
| Power Supply | 220-240 V, 50 Hz |
Steps for removing the propeller fan and its fixing nut.
Steps for disconnecting the fan motor connector and removing the motor.
Removing front panel, suction grille, top panel, side panel, and piping cover.
Disconnecting wirings, removing screws, and detaching the switch box unit.
Removing panels and switch box to access the PCB.
Disconnecting connectors and removing the PCB for the display.
Removing mounting plates for terminal block and electric components.
Disconnecting connectors, removing screws, and detaching the PCB assembly.
Removing the pressure sensor by cutting the brazing.
Removing the pressure switch by cutting the brazing.
Removing the electronic expansion valve body after cutting brazing.
Steps for removing various thermistors (outdoor, discharge, suction, heat exchanger).
Removing the four way valve and its main unit after cutting brazings.
Steps to remove the compressor including its mounting nuts and brazings.
To Next Page