EasyManua.ls Logo

Daikin RZR18TBVJUA User Manual

Daikin RZR18TBVJUA
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
English
Français
Español
INSTALLATION MANUAL
MODEL
RZQ18TBVJUA
RZQ24TBVJUA
RZQ30TBVJUA
RZQ36TBVJUA
RZQ42TBVJUA
RZQ48TBVJUA
RZR18TBVJUA
RZR24TBVJUA
RZR30TBVJUA
RZR36TBVJUA
RZR42TBVJUA
RZR48TBVJUA
SPLIT SYSTEM Air Conditioners
Read these instructions carefully before installation.
Keep this manual in a handy place for future reference.
This manual should be left with the equipment owner.
Lire soigneusement ces instructions avant l’installation.
Conserver ce manuel à portée de main pour référence ultérieure.
Ce manuel doit être donné au propriétaire de l’équipement.
Lea cuidadosamente estas instrucciones antes de instalar.
Guarde este manual en un lugar a mano para leer en caso de
tener alguna duda.
Este manual debe permanecer con el propietario del equipo.
00_CV_3P591321-10C.indd 100_CV_3P591321-10C.indd 1 2022/08/04 10:16:502022/08/04 10:16:50
Question and Answer IconNeed help?

Do you have a question about the Daikin RZR18TBVJUA and is the answer not in the manual?

Daikin RZR18TBVJUA Specifications

General IconGeneral
BrandDaikin
ModelRZR18TBVJUA
CategoryAir Conditioner
LanguageEnglish

Summary

Safety Considerations

Safety Symbol Meanings

Explains the meaning of DANGER, WARNING, CAUTION, and NOTE symbols used in the manual.

Danger Hazards

Details immediate hazardous situations that could lead to death or serious injury.

Warning Hazards

Details potentially hazardous situations that could lead to death or serious injury.

Selecting Installation Site

Installation Site Selection Criteria

Outlines essential criteria for choosing an appropriate installation location.

Refrigerant Piping

Specialized Installation Tools

Lists and describes specialized tools required for refrigerant piping.

Piping Material Selection

Guides on selecting appropriate piping materials suitable for refrigerants.

Pipe Contamination Protection

Advises on preventing contamination during refrigerant pipe installation.

Air Tightness and Vacuum Drying

Explains the procedures for performing air tight testing and vacuum drying.

Electric Wiring

Additional Refrigerant Charge

Refrigerant Charging Procedure

Details the procedure and precautions for adding refrigerant.

Post-Work Checks

Test Operation

Crank Case Heater Pre-Power Activation

Advises pre-operation power activation for the crank case heater.

Pre-Power On Operational Precautions

Lists critical steps to take before powering on the unit.

Initial Power On and Check Operation

Details the procedure for initial power-on and system check.

Temperature Control Operation Verification

Outlines checks for normal operation and temperature control.

Temperature Control Check Precautions

Lists important precautions to observe during temperature control checks.

Final Refrigerant Charge Tuning

Explains how to adjust refrigerant charge for optimal performance.

Setting of Heat Pump Lockout and Emergency Heat Mode

Caution for Refrigerant Leaks

Refrigerant Leak Introduction

Introduces safety considerations and regulations concerning refrigerant leaks.

Max Refrigerant Concentration Level

Explains how to determine the maximum allowable refrigerant concentration.

Max Concentration Check Procedure

Outlines the steps to calculate and check the maximum refrigerant concentration.

Related product manuals