SiBE121021_C Function of Indoor Unit (RA Models)
Function and Control 103
1.15.7 Auto-restart Function
Even if a power failure (including one for just a moment) occurs during the operation, the
operation restarts automatically when the power is restored in the same condition as before the
power failure.
Note: It takes 3 minutes to restart the operation because the 3-minute standby function is activated.
1.15.8 WEEKLY TIMER Operation
Up to 4 timer settings can be saved for each day of the week (up to 28 settings in total).
Those 3 items of “ON/OFF”, “temperature” and “time” can be set.
Refer to “WEEKLY TIMER Operation” on the following pages for detail.
FTXG, CTXG series: page 146
FTXS, FVXS series: page 183
To Next Page
Loading...