SiBE121021_C RA Indoor Unit
Operation Manual 203
2.3.7 POWERFUL Operation
POWERFUL Operation
1. Press “POWERFUL button”.
2. Press “POWERFUL button” again.
NOTE
Notes on POWERFUL operation
• In COOL and HEAT mode
• In DRY mode
• In FAN mode
• When using priority-room setting
1, 2
POWERFUL operation quickly maximizes the cooling
(heating) effect in any operation mode. You can get the
maximum capacity.
To start POWERFUL
operation
• POWERFUL operation ends in 20minutes.
Then the system automatically operates
again with the previous settings which were
used before POWERFUL operation.
• “ ” is displayed on the LCD.
• When using POWERFUL operation, there
are some functions which are not available.
To cancel POWERFUL
operation
• “ ” disappears from the LCD.
• POWERFUL Operation cannot be used together with ECONO, QUIET, or COMFORT
Operation. Priority is given to the function of whichever button is pressed last.
• POWERFUL Operation can only be set when the unit is running. Pressing the operation
stop button causes the settings to be canceled, and the “ ” disappears from the LCD.
• POWERFUL operation will not increase the capacity of the air conditioner if the air
conditioner is already in operation with its maximum capacity demonstrated.
To maximize the cooling (heating) effect, the capacity of outdoor unit must be increased
and the airflow rate be fixed to the maximum setting.
The temperature and airflow settings are not variable.
The temperature setting is lowered by 2.5˚C and the airflow rate is slightly increased.
The airflow rate is fixed to the maximum setting.
See “Note for multi system”.
To Next Page
Loading...
Need help?
General
