Daikin UAA-ST3M - 7.1.2 Troubleshooting With Alarm

Page | 41
7.1.2 With Alarm
Start-up Troubleshooting – With Alarm
Steps
Description
1
Choose the Alarms menu in the main menu and press the knob
2
Press the knob to view alarm log and active alarms
3
After entering the Alarm Active menu, you can view the number of alarms and
clear alarms.
See the following figure
By turning the knob clockwise or anticlockwise, you can select an alarm. Then press the
knob to view the data and time when the alarm is generated.
4
Record the alarm information displayed on the controller in the following table