Daikin VAM150HVE User Manual

Daikin VAM150HVE

20 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

OPERATION MANUAL

MODELS

(Ceiling-mounted Duct type)

VAM150HVE

VAM250HVE

VAM350HVE

VAM500HVE

VAM650HVE

VAM800HVE

VAM1000HVE

VAM1500HVE

VAM2000HVE

Total Heat Exchanger

Heat Reclaim Ventilator

For

Production

only:

For

Indonesia:

For

Thailand:

For

Vietnam:

3P645002-1

CVR-OM-VAM-HVE-DAIKIN-EN.indd 1 23/9/2021 5:08:50 PM

Table of Contents

Other manuals for Daikin VAM150HVE

Engineering Data188 pages

Questions and Answers:

S
Sandra MillsAug 6, 2025
What to do if my Daikin Industrial Equipment unit does not operate at all?
- P
  Paula UnderwoodAug 6, 2025
  If your Daikin Industrial Equipment unit isn't operating, first, check for a power failure and restart the unit after power is restored. Second, verify if the fuse has blown and contact your dealer if it has. Third, check the breaker switch; if it's off, turn it on, but if it's tripped, do not turn it on and contact your dealer. Finally, if the remote control displays 'Under centralized control,' operate the unit using the centralized controller.
R
robertsstephanieAug 10, 2025
Why does my Daikin Industrial Equipment operation not start?
- J
  Jacob FletcherAug 10, 2025
  Your Daikin Industrial Equipment might not start because the central device is controlling the unit, indicated by a blinking display that disables the remote control. Alternatively, the unit might be in pre-cooling or pre-heating mode, in which case operation will begin once this process is complete. It could also be in preparation mode, requiring you to wait about 1 minute. Lastly, the auto cut-off function may have been triggered; press the ON/OFF button once, and then again after several seconds.
C
Carmen WongAug 14, 2025
What to do if the Daikin Industrial Equipment has a small volume of discharged air and the sound is loud?
- D
  Destiny Butler DVMAug 14, 2025
  If your Daikin Industrial Equipment is emitting a small volume of air and making a loud noise, it's likely that the air filter and heat exchange element are clogged. You should clean the air filter and heat exchange element.
T
Tiffany WilliamsAug 18, 2025
What to do if the Daikin Industrial Equipment has a large volume of discharged air and the sound is loud?
- R
  riddledavidAug 18, 2025
  If your Daikin Industrial Equipment is discharging a large volume of air and is making a loud noise, check to see if the air filter and heat exchange element are not installed. Install the air filter and heat exchange element in the correct position.
N
Nicole MillerAug 22, 2025
Why does my Daikin Industrial Equipment operation stop sometimes?
- T
  Timothy HerreraAug 23, 2025
  Your Daikin Industrial Equipment might stop sometimes because the remote control is intercepting interference (noise) from other electrical appliances. Operation will automatically restart when the interference goes away. Also, the exhaust fan may temporarily stop operation when the mode is switched between 'Total heat exchange' and 'Bypass' modes.
E
Erica JonesAug 27, 2025
Why does my Daikin Industrial Equipment unit work even when the operation lamp is not ON?
- J
  Janice GutierrezAug 27, 2025
  The Daikin Industrial Equipment unit may operate even when the operation lamp is off if the nighttime free cooling operation and 24-hour ventilation operation are set to 'ON'.
K
Katrina LarsonAug 31, 2025
Why does my Daikin Industrial Equipment operation start even when the remote control is not operated?
- K
  kathy57Sep 1, 2025
  Your Daikin Industrial Equipment might start operating even without using the remote control if the power and power failure recovery settings are set to 'ON'.

Daikin VAM150HVE Specifications

General

Brand	Daikin
Model	VAM150HVE
Category	Fan
Language	English

Summary

Name of Parts

Maintenance Cover

Heat Exchange Element

Core component for heat recovery between air streams.

Air Filter

1 SAFETY CAUTIONS

WARNING (During Operation)

Critical safety warnings during unit operation.

CAUTION (During Operation)

Important operational precautions for safety.

WARNING (For Installation)

Critical safety warnings during unit installation.

CAUTION (For Installation)

Important installation precautions for safety.

2 WHAT TO DO BEFORE OPERATION

Ventilation Operation

Optimum Operation

3 OPERATION PROCEDURE

24-Hour Ventilation Operation

Nighttime Free Cooling Operation

4 MAINTENANCE

Maintenance Warnings

Critical safety warnings for maintenance tasks.

Maintenance Precautions

Precautions for performing maintenance safely.

4-1 ROUTINE MAINTENANCE

How to Clean the Air Filter

Step-by-step guide for cleaning air filters.

How to Clean the Heat Exchange Element

Instructions for cleaning the heat exchange element.

How to Install and Replace High-Performance Filter

5 TROUBLE SHOOTING

Situations That Are Not Malfunctions

Before Requesting Service

Common Issues Not Requiring Service

Service Warnings and Error Codes

Important warnings and specific error code list for service.

6 AFTER-SALES SERVICE

Service Warnings and Procedures

Safety warnings and dealer contact advice.

Recommended Inspection and Maintenance Cycles

Recommended Replacement Cycle of Consumables

Related product manuals

Daikin VAM1500GJVE

Daikin VAM1500HVLT

Daikin VAM1000HVE

Daikin VAM1000GJVE

Daikin VAM1000J8VEB

Preview: Daikin VAM-FA

Daikin VAM-FA8VE

Preview: Daikin VAM Series

Daikin VAM Series

Preview: Daikin VAM 350GJVE

Daikin VAM 350GJVE

Daikin VAM2000GJVE

Daikin VAM2000J8VEB

Preview: Daikin VAM-J8 Series

Daikin VAM-J8 Series