6. Inspecting, handling and unpacking the unit
6.1. Inspection
At delivery, the unit must be checked and any damage must be re-
ported immediately to the carrier’s claims agent.
6.2. Handling
1 When handling the unit, take into account the following:
Fragile, handle the unit with care.
Keep the unit upright in order to avoid compressor damage.
2 Choose beforehand the path along which the unit is to be brought
in.
3 $TKPIVJGWPKVCUENQUGCURQUUKDNGVQKVUƂPCNKPUVCNNCVKQPRQUKVKQPKP
its original package to prevent damage during transport.
4
4
2
2
4
3
3
1
1 Packaging material
2 Belt sling
3 Opening
4 Protector
4 Lift the unit preferably with a crane and 2 belts of at least 27 ft.
ONQPICUUJQYPKPVJGƂIWTGCDQXG
Always use protectors to prevent belt damage and pay attention to
the position of the unit’s center of gravity.
NOTE
Use a belt sling of d3/4 in. (20 mm) wide that adequately bears the
weight of the unit.
A forklift can only be used for transport as long as the unit remains on
its pallet as shown above.
6.3. Unpacking
CAUTION
6QCXQKFKPLWT[FQPQVVQWEJVJGCKTKPNGVQTCNWOKPWOƂPUQHVJGWPKV
Relief the unit from its packing material:
RXYQ72TTJU/TYDN RXYQ96-168TTJU/TYDN
Take care not to damage the unit when removing the shrink foil with a
cutter.
WARNING
Tear apart and throw away plastic packaging bags so that children will
not play with them. Children playing with plastic bags face danger of
death by suffocation.
1 4GOQXGVJGDQNVUƂZKPIVJGWPKVVQKVURCNNGV
2 Make sure that all accessories as mentioned in 2.1. Accessories
UWRRNKGFYKVJVJKUWPKVQPRCIG|CTGCXCKNCDNGKPVJGWPKV
6.4. Installing the unit
/CMGUWTGVJGWPKVKUKPUVCNNGFNGXGNQPCUWHƂEKGPVN[UVTQPIDCUGVQ
prevent vibration and noise.
NOTE
When the installation height of the unit needs to be increased, do not
use stands to only support the corners.
A
A
A
A
A
A
A
A
A
A
A
A
A
t3-7/8 in. (100 mm)
X Not allowed
O Allowed
To Next Page
Loading...
