6. Wiring Diagrams
C: 3D065426D
NOTES)
1. : TERMINAL BLOCK, , : CONNECTOR, : TERMINAL, : SHORT CIRCUIT CONNECTOR, : FIELD WIRING.
2. IN CASE USING CENTRAL REMOTE CONTROLLER, CONNECT IT TO THE UNIT IN ACCORDANCE WITH THE ATTACHED INSTRUCTION MANUAL.
3. IN CASE CONNECTING THE INPUT WIRES FROM OUTSIDE, FORCED OFF OR ON/OFF CONTROL OPERATION CAN BE SELECTED BY REMOTE CONTROLLER.
IN DETAILS, REFER TO THE INSTALLATION MANUAL ATTACHED TO THE UNIT.
4. DO NOT REMOVE SHORT CIRCUIT CONNECTOR OF X9A.
5. SYMBOLS SHOW AS FOLLOWS: RED: RED BLK: BLACK WHT: WHITE YLW: YELLOW PPL: PURPLE GRY: GRAY BLU: BLUE PNK: PINK ORG: ORANGE
GRN: GREEN
6. CLASS 2 WIRE
To Next Page
Loading...
