Field Settings from Remote Controller Si30-408
52 Field Settings from Remote Controller
Mode No. Function Contents and setting method Example of display on remote
controller
43
Forcedly fan ON Forcedly fan ON
By selecting the unit No. with the
button, the fan of each indoor unit will be
forcedly turned on (forcedly ON) individually.
44
Individual setting
Select the unit by using button.
Set the air flow rate with the button.
Set the air flow direction with the
button.
45
Unit No. transfer Transfer unit No.
Select the unit No. with the button,
Select the unit no. after transfer with the .
Unit
43
1
Unit
44
1
13
Code
Air flow rate
1: Low
3: High
Air flow direction
P0 ~ P4
Unit
45
1
02
Code
Unit No. after
transfer
Present unit No.
To Next Page
Loading...
