Daikin VRVIII-S Series - Dimensional Drawing and Center of Gravity

• VRV Systems • Indoor Units
15
• Indoor Units • 4-WAY BLOW CEILING SUSPENDED CASSETTE • BEVQ-MAVE
11 Junction box - BEVQ-MAVE
11 - 2 Dimensional drawing & centre of gravity
3
BEVQ-MA
3TW045389
100 or more
(Servicing space)
(Servicing space)
Note 2
(165.5)
(Suspension bolt pitch)
4-M4 Mounting
(Servicing space)
500 or more
(Servicing space)
200 or more
(Servicing space)
200 or more
INSTALLATION FIGURE
(When installing the unit on wall)
NOTES
1 Be sure to install wire connection port to be sure to become
downward.
2 Be sure to secure the space which can be the thightening work of
the flare nut.
Nr. Part name Description
1 Liquid pipe connection port ø9.5 Flare connection
2 Gas pipe connection port ø15.9 Flare connection
3 Electric parts box
4 Suspension bolt
5 Wire connection port (Indoor unit conncection)
6 Wire connection port (Power supply • Ground)
7 Wire connection port (Transmission (VRV) • Gas pipe thermistor)
BEVQ-MA
3TW0453
100 or more
(Servicing space)
(Servicing space)
Note 2
(165.5)
(Suspension bolt pitch)
(Suspension bolt pitch)
(Servicing space)
200 or more
(Servicing space)
200 or more
Inspection hatch
INSTALLATION FIGURE
(When hanging the unit from the ceiling)
NOTES
1 Be sure to install wire connection port to be sure to become
downward.
2 Be sure to secure the space which can be the thightening work of
the flare nut.
3 Be sure to secure the space of 400 mm or more when you cannot
install the inspection hatch right under the unit.
Nr. Part name Description
1 Liquid pipe connection port ø9.5 Flare connection
2 Gas pipe connection port ø15.9 Flare connection
3 Electric parts box
4 Suspension bolt
5 Wire connection port (Indoor unit conncection)
6 Wire connection port (Power supply • Ground)
7 Wire connection port (Transmission (VRV) • Gas pipe thermistor)
90