Daikin ZH(C)3LSF - Required Tools; General Tools and Measuring Instruments; Special Tools

Si50-203 Caution in Test Operation
Semi-Hermetic Single Screw Compressor Version III 31
7. Caution in Test Operation
1) Check to make sure all bolts are tightened.
2) Check the wiring for proper connection.
3) Conduct inching.
 Check the rotating direction using high and low pressure gauges.
(If the rotating direction is correct, the low pressure gauge indicates decreasing and the
high pressure gauge shows rising pressure.)
 Check that no abnormal noise is generated.