Need help?Do you have a question about the DAITEM SC100AU and is the answer not in the manual?
Details the physical keys and layout of the handset.
Explains the icons and information shown on the handset display.
Shows the general information screen displayed when the handset is idle.
Instructions for answering calls when the handset is placed on its base.
Instructions for answering calls when the handset is removed from its base.
How to operate a latch while actively communicating with an access point.
Methods to operate a latch when no active call is in progress.
How to operate a gate while actively communicating with an access point.
Methods to operate a gate when no active call is in progress.
How to operate a side gate while actively communicating with an access point.
Methods to operate a side gate when no active call is in progress.
Provides a guide to navigating the system's configuration menus.
Details how to manage RFID tags for access control.
Explains how to set up and manage access codes.
Guides on customizing display settings and backlight behavior.
Covers adjustments for ringing volumes and keypad tones.
Details how to configure command logic for various system functions.
Allows setting pulse durations for gate and latch operations.
Provides a guide to navigating the handset's configuration menus.
Guides on changing temperature units and naming functions.
Covers adjustments for door bell sounds, ringing duration, and volumes.
Details settings for auto pick-up, button commands, and language.
Contains information for use by the manufacturer.
General| Brand | DAITEM |
|---|---|
| Model | SC100AU |
| Category | Intercom System |
| Language | English |
To Next Page
