Do you have a question about the DAITEM MHF02X and is the answer not in the manual?
Details the physical components and controls of the Daitem handset.
Explains the various icons and information displayed on the handset screen.
Shows the handset screen layout and information displayed in standby mode.
Step-by-step guide on answering calls using the handset placed on its base.
Instructions for answering calls when the handset is detached from its base.
How to unlock a latch while actively communicating with an access point.
Procedures for unlocking latches using tags, codes, or the handset when not in active communication.
How to activate a gate while actively communicating with an access point.
Procedures for activating gates using tags, codes, or the handset when not in active communication.
How to unlock a side gate while actively communicating with an access point.
Procedures for unlocking side gates using tags, codes, or the handset when not in active communication.
Guide on navigating the system's configuration menus using the handset.
Instructions for registering, modifying, and deleting tags for access control.
Procedures for setting up and managing access codes for gates, latches, or side gates.
Customizing names for access points/call buttons and configuring outdoor unit backlighting.
Adjusting ringing volumes, keypad tones, and voice communication volume.
Defining automatic commands for tags/codes for gate or latch operations.
Setting pulse durations for gate, pedestrian, and electric strike controls.
Information for use by the manufacturer.
Guide to navigating the handset's configuration menus for various settings.
Changing temperature units, naming handset/lights/garages, and managing backlighting.
Configuring door bell sounds, ringing durations, keypad tones, and voice volume.
Setting auto pick-up, changing button commands, and setting the time/language.
Information for use by the manufacturer.
| Brand | DAITEM |
|---|---|
| Model | MHF02X |
| Category | Intercom System |
| Language | English |