DAITEM MHF02X - 6.2 When Not Communicating

11
Activate the outdoor
caller unit
Status display
on the handset (1)
Latch access status
1. Hold the tag in front of the
name label.
2. Press (3).
Closed
1. Or enter the access code
(2).
Mr et Mme Evêque-Mourroux
C
Mr et Mme Evêque-Mourroux
3. The latch is unlocked within
5 seconds.
Open
C
(1) If a position contact is connected.
(2) If you press the wrong button, press then enter the access code again.
(3) Only applies to the outdoor caller unit with keypad. If the AUTO COMMAND parameter (see
ACCESS/PARAMETERS/AUTO COMMAND menu) is set to ELECTRIC STRIKE, the latch is opened as soon as the tag
is held up to the caller unit or the access code is entered. There is then no need to press .
6.2.1 Using the keypad caller unit
6.2 When not communicating