DAITEM MHF02X - Page 12

12
6.2.2 Using the handset
Activate the handset
Status display
on the handset (1)
Latch access status
1. Quickly press (2).
2. If you have more than
2 latch access points,
pick up the handset (if it is
on the base), open the flip
cover and select the access
point to be opened using
the keys
then .
Closed
Closed
C
C
3. If you only have one latch
access point,
the opening command is
sent directly to it.
Opening command sent
C
(1) if a position contact is connected.
(2) Latch access can be operated using (see HANDSET/CONFIGURATION/OPEN BUTTON menu).
3. The latch is unlocked within
5 seconds.
Open
C