DAITEM SH273AX - 1 Introduction; Table of Contents

57
GB
1. Introduction
IMPORTANT
• Some functions are only available
with versions 2.0.0 or later (press
on
the control panel keypad to
check the version).
• The operating differences with
former ranges are described in
the compatibility booklet
available in the Daitem installers
section at www.daitem.co.uk.
Contents
1. Introduction .................... 57
2. Preparation ..................... 58
2.1 Opening...................... 58
2.2 Power supply............. 58
3. Programming.................. 59
4. Installing.......................... 60
4.1 Choosing
the best place ............ 60
4.2 Fixing method
and installing
the magnet holder...... 61
5. Testing ............................. 63
6. Maintenance................... 64
6.1 Battery low
indication.................... 64
6.2 Changing
the battery.................. 65
7. Technical data ................ 66
Built-in
magnetic
contact
LED indicator
lamp
Test button
Screw cover
The contact detector is used to
protect openings such as doors &
windows. It is fitted with a built-in
magnetic contact (reed switch).