Do you have a question about the Daitsu ADP 9AM and is the answer not in the manual?
Type | Split |
---|---|
Cooling Capacity | 2.5 kW |
Heating Capacity | 2.8 kW |
Energy Efficiency Cooling | 3.5 |
Energy Efficiency Heating | 3.5 |
Power Supply | 220-240V, 50Hz |
Power Consumption (Cooling) | 0.78 kW |
Power Consumption (Heating) | 0.76 kW |
EER (Cooling) | 3.5 |
COP (Heating) | 3.5 |
Dimensions (Indoor Unit) | 250 mm |
Dimensions (Outdoor Unit) | 700 mm |
Details the controls and indicators for cooling and heating modes.
Details the controls and indicators for cooling-only models.
Instructions for initial setup and preparation before operating the unit.
Instructions for operating the unit in cooling mode.
Instructions for operating the unit in dehumidifying mode.
Instructions for operating the unit in heating mode.
Instructions for operating the unit in fan-only mode.
Instructions for setting the unit's on and off timers.
Instructions for draining water using the built-in water pump.
Instructions for continuous drainage of condensed water.
Key points for installing the air conditioner in a suitable location.
Steps for temporarily attaching the exhaust duct.
Steps for permanently attaching the exhaust duct.
Instructions for fitting the window kit for exhaust hose placement.
Explanation of the drain tank's safety features and water level monitoring.
Essential precautions before cleaning the unit.
Procedure for removing, cleaning, and mounting the air filter.
Instructions for cleaning the exterior of the air conditioner unit.
Diagnosing why the unit does not start when the power button is pressed.
Identifying causes and solutions when cooling performance is insufficient.
Addressing automatic power shut-off during heating mode.
Resolving issues related to noise and vibration from the unit.
Explaining the cause of gurgling sounds and their normality.