11
ENGLISH
Example of Timer setting
TIMER ON
(Auto-on Operation)
The TIMER ON feature is useful when you want the unit to
turn on automatically before say when you return home. The
air conditioner will automa¬tically start operating at the set
time.
Example:
To start the air conditioner in 6 hours.
1. Press the TIMER ON button, the last setting of starting
operation time and the signal “h” will show on the display
area.
2. Press the TIMER ON button to display “6:0 h” on the
TIMER ON display of the remote controller.
3. Wait for about 3 seconds and the digital display area
will show the temperature again. Now this function is
activated.
IMPORTANT
The effective operation time set by the remote controller for the timer function is limited to the following •
settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12,
13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23 and 24.
Off
Start
Set
6 hours later
To Next Page
