Need help?Do you have a question about the Daitsu DS-9KIDB and is the answer not in the manual?
General| Type | Split System |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Net Weight (Indoor Unit) | 8 kg |
| Net Weight (Outdoor Unit) | 25 kg |
| Operating Temperature (Cooling) | 18°C to 43°C |
| Refrigerant | R32 |
Details technical specifications for cooling and heating capacities, power, and dimensions.
Provides dimensions and diagrams for the indoor unit.
Shows dimensions and diagrams for the outdoor unit.
Introduces the remote controller, its buttons, icons, and general operation.
Covers ON/OFF, Mode, Fan speed, Temperature, Swing, and Sleep functions.
Details Temp, Turbo, I Feel, Timer, X-Fan, Light, and combination button operations.
Explains WIFI function, battery replacement, and emergency operation procedures.
Explains cooling, drying, heating, auto, fan modes, and other controls for the indoor unit.
Details I Feel, defrosting, refrigerant recovery, ambient temp display, off-peak, SE, X-fan, 8°C heating, Turbo modes.
Explains cooling, drying, fan, and heating modes for the outdoor unit.
Details refrigerant recovery and compulsory defrosting procedures for the outdoor unit.
Explains Auto mode logic and 8°C heating function for the outdoor unit.
Important safety warnings for installation and maintenance, covering electrical and general safety.
Safety measures for handling refrigerant during installation and relocation.
Details safety measures and warnings related to the R32 refrigerant used in the unit.
Specifies technician qualifications and covers installation, maintenance, welding, and refrigerant filling notes.
Illustrates required clearances and dimensions for indoor and outdoor unit installation.
Details safety measures for electrical connections during installation.
Covers location selection, wall frame installation, piping, drain hose, and wiring for the indoor unit.
Details fixing the support, drain joint, securing the unit, connecting pipes and wiring, and neatening pipes.
Covers checks, test operation, and refrigerant leakage detection after installation.
To Next Page
