Need help?Do you have a question about the Daiwa DK-200 and is the answer not in the manual?
Details of GRID BLOCK and DIRECT keying outputs and their ratings.
Information on power consumption, battery operation, and physical size.
Lists of connectors like RCA, Stereo phone, and DC plugs.
The LED speed indicator and the Speed control knob for setting WPM.
Function of the Pilot LED and the Line Switch for powering the unit.
Adjusts the ratio of DASH/DOT and SPACE for optimal keying.
Adjusts the audio level of the built-in side-tone oscillator.
Selects operating modes: AUTO, SEMI AUTO, or TUNE.
Port for connecting the keyer paddle using a two-conductor shielded cable.
Speaker for side-tone reproduction and DC socket for power input.
Describes GRID BLOCK and DIRECT keying outputs for transmitter connection.
Trimpot to adjust the side-tone oscillator frequency between 500 and 3000 Hz.
Verify keying method and use appropriate output to avoid continuous keying.
Guidance on using a 9-Volt battery and conserving power, including LED disabling.
To Next Page
General