Dakota Digital DCC-4000 User Manual

1 MAN # 650702
INSTALLATION AND OPERATOR’S MANUAL
FOR
DCC-4000
Digital Climate Control for Vintage Air GEN-IV systems
PARTS INCLUDED WITH THIS SYSTEM
DCC-4000 display (x1)
DCC control box (x1)
HLC harness (x1)
11” plastic ties (x6)
6 “ plastic ties (x2)
Grommet temp sensors (x4)
Clip temp sensors (x2)
DCC controller
harness (x1)
DCC display
harness
(x1)
Mount brackets (x2)
Thumb nuts (x2)
Installation / operator’s
manual (x1)
Cutout template (x1)
2” Vent sensor
housings (x2)
2 ½” Vent sensor housings (x2)

Dakota Digital DCC-4000 Specifications

General

Brand	Dakota Digital
Model	DCC-4000
Category	Control Unit
Language	English

Summary

Connection Diagram

Installation Steps

Install Defrost Sensor

Install the grommet type temperature sensor into the defrost duct housing using a 3/8" hole and drill stop.

Install Floor Sensors

Attach clip type temperature sensors to the side wall of each floor duct opening, inside the duct.

Install Cabin Sensor

Secure a grommet type temperature sensor to the blower fan grate using plastic ties for airflow.

Install Vent Sensors

Mount vent sensors in flexible duct tubing 6" from module, using vent housings and plastic ties.

Mount Control Box

Mount Display

Operation Overview

Blower Knob Functions

Temperature Knob Functions

Setup Menu Options

Calibration and Troubleshooting

GEN-IV Calibration

Error Handling

Troubleshooting Common Issues

Provides solutions for common problems like display not lighting or system response issues.