Dakota Digital MCL-2002 User Manual

MAN# 650280:D
MODEL MCL-2002
TANK MOUNT SPEEDOMETER/TACHOMETER
*To avoid damage to motorcycle, please see Speedometer, Tachometer, and Status and Warning Indicators sections for details on locating
VSS, Tachometer, and indicator wires for most motorcycle applications
**For 2004+ HD utilizing the “Fat Bob” tank mount, please see our MCL-2004, it is designed as a direct plug-in gauge for these models. The
Check Engine indicator will not function using this gauge on 2004+ HD models due to the signal being fed through the ‘data bus’.
Mounting:
The base system is universal enough to fit in either a new-style, clip-in
(1995 or newer) or into the older style, bolt-in. The rubber mounts with studs on
both sides are used for the bolt-in style. The L-brackets are used for the clip in
style. The ¼” ABS ring is used for Deuce mounting.
Mounting hardware for the bolt-in system
with a speedometer cable
Mounting hardware for the clip-in system with an electric
transmission speed sensor.
IMPORTANT NOTE! This gauge has an odometer preset option that is only available for the first
100 miles (160km) of operation. See “preset odometer” for instructions.

Dakota Digital MCL-2002 Specifications

General

Brand	Dakota Digital
Model	MCL-2002
Category	Automobile Parts
Language	English

Summary

Mounting Instructions

Mounting in Dash (Cable Drive)

Instructions for mounting the gauge in a dash using a cable drive speedometer and rubber mounts.

Mounting in Dash (Electronic Sensor)

Instructions for mounting the gauge in a dash with a factory electronic speed sensor.

Deuce Mounting

Specific instructions for mounting the gauge on a Deuce model using an ABS bracket.

Wiring Guide

Power and Ground Connections

Details on connecting the power wires (accessory and constant battery) and ground wire.

Gauge Functions and Indicators

Speedometer Operation

Tachometer Operation

Setup Menus Overview

Speedometer Setup and Calibration

Guide for calibrating the speedometer using auto cal or adjust methods.

Speed Calibration Methods

Details the 'Auto Cal' and 'Adjust' methods for speedometer calibration.

Wiring and Specifications

Wiring Color Code for Gauge

Table mapping gauge wire colors to Harley-Davidson stock harness colors and functions.

Technical Specifications

Troubleshooting Guide

Common Gauge Problems and Solutions

Addresses issues like gauge not lighting up, incorrect readings, and non-functional indicators.

Speed Sensor Voltage Checks

Provides procedures for testing 3-wire and 2-wire speed sensors with a voltmeter.