4
MAN#650658:D
SETUP MENU
*To simplify the setup procedure please download our IOS or Android app ‘Dakota Digital Motorcycle’*
The function switch is used to enter setup mode. To get into setup, press and hold the function switch while turning the
key on. Press and release the switch to advance through the menus below, press and hold to enter each menu.
Main Menu Sub Menu Description
BLUETOOTH STATUS CHECK Bluetooth ID and current connection status
OFF Disable Bluetooth connections
SETUP ONLY Allow Bluetooth connections only while in setup
ALWAYS ON Allow Bluetooth connections when key is on
DIAGNOSTICS ENGINE Read diagnostic codes from engine module
SECURITY Read diagnostic codes from security module
ABS Read diagnostic codes from ABS module
LIGHTING COLOR THEMES Set factory defined color themes
SET ALL COLOR Set all areas to one color
DISPLAY COLOR Set speed digit color
LABEL COLOR Set speed label color
MESSAGE COLOR Set message location 1 and 2 color
BAR COLOR Set tach/fuel bar color
WARNING COLOR Set tach high warning color
DIMMING Set dimming method
SUNLIGHT Set sunlight brightness method
RESET Returns all colors and settings to factory default
SPEED ADJUST Adjust speed calibration +/- 25%
UNIT Select MPH or km/h unit
SERVICE RESET Set miles to service reset value or turn off
ODO PRESET Odometer preset (Can only be set within first 100 miles)
TACH HIGH WARNING Set high RPM warning point
TEMP UNIT Set temperature unit
FUEL SENDER Select fuel sender
WARNING LIGHT Enable/Disable fuel low warning light
RANGE TO EMPTY Enable/Disable/Reset distance to empty
TEST Display sender reading for troubleshooting
VOLT LOW WARNING Set low warning point
DISPLAYS MESSAGE TOP Show/Hide performance readings in top message location
MESSAGE BTM Show/Hide performance readings in bottom message location
INDICATORS Show/Hide indicators within gauge
MBMS Show MBM’s connected to the speedometer and set warning points
GEAR PRESET Set gears for factory Dyna or Softail
P-1200 Set gears for factory Sportster 1200
P-883 Set gears for factory Sportster 883
LEARN Learn gears based on speed and RPM
FACTORY RESET Resets all settings except odometer to factory defaults
VERSION Displays software codes of each controller
EXIT SETUP Exit
To Next Page
Loading...