MAN#650128
PAC-3100
LINEAR MOTOR CONTROLLER
W/ CURRENT SENSING AUTO REVERSE
Switch 1 (safety disable, page 3 for more detail)
ON - Disables preset buttons and external presets when key is ON
OFF - Buttons work the entire time key ON/OFF
Note: the external manual UP/DOWN will work all of the time
Switch 2 (auto move feature, page 3 for more detail)
ON - Enable auto move: when key ON move to position 1
when key OFF move to position 2
OFF - Disable auto move feature
Switch 3 (auto reverse sensitivity, page 3 for more detail)
ON - High sensitivity
OFF - Low sensitivity
Switch 4 (auto reverse enable, page 3 for more detail)
SW4 ON - Auto reverse enabled
SW4 OFF - Auto reverse disabled
Switch 5 - NOT USED
Switch 6 - NOT USED
To Next Page
Need help?
General
