Daktronics BA-1518 - User Manual

Other manuals for Daktronics BA-1518

Installation, Maintenance, And Specifications Manual152 pages

Questions and Answers

C
Cody MartinezAug 11, 2025
How to troubleshoot a Daktronics Accessories scoreboard that doesn’t light up and the console doesn’t work?
- S
  Samuel WheelerAug 11, 2025
  If your Daktronics Accessories scoreboard doesn't light up and the console isn't working, first check that the main circuit breaker for the scoreboard is on. Also, ensure the scoreboard is receiving the correct 120 or 240 V AC power. For the console, make sure it's plugged into a 120 or 240 V AC power supply. As a test, you can swap the console with one that is known to work, entering the correct sport code and radio settings. If it still doesn't work, the console may need to be replaced.
B
Brent GonzalezAug 16, 2025
Why do Daktronics Accessories scoreboard digits light, but not in the correct order?
- J
  Jill WilliamsAug 16, 2025
  If the digits on your Daktronics Accessories scoreboard light up in the wrong order, it might be due to an incorrect sport code. Ensure you are using the correct sport code for your scoreboard model. Also, verify that the scoreboard drivers are set to the correct addresses.
J
Jerry HartAug 23, 2025
What to do if Daktronics Accessories scoreboard digits don’t light, but the console works?
- M
  Manuel HollowayAug 23, 2025
  If your Daktronics Accessories scoreboard digits don’t light up, but the console is working, verify the scoreboard is receiving the correct 120 or 240 V AC power. Check that the red DS2 LED on the driver lights up when sending commands from the control console. Also, cycle power to the scoreboard and watch for radio receiver broadcast or channel settings.
D
Deborah MitchellAug 29, 2025
Why does Daktronics Accessories scoreboard work, but some LEDs do not light or they blink?
- A
  Anthony OwensAug 29, 2025
  If your Daktronics Accessories scoreboard is working but some LEDs do not light or blink, ensure the connector on the back of the digit circuit board is secure. To identify whether it is a bad digit or driver, swap the digit or driver with one that you know works correctly. Replace if necessary.
R
Robert GarrisonSep 4, 2025
What causes some LEDs to always stay on when Daktronics Accessories scoreboard works?
- D
  Danielle DeleonSep 4, 2025
  If your Daktronics Accessories scoreboard works, but some LEDs always stay on, it could be due to a short in the digit, segment, or indicator circuit. Try swapping the digit, segment, or indicator with one known to work correctly to verify if that resolves the problem. Replace the affected component if necessary.