6
English
DALI recommends DALI White Wave cables for Concept series
The same guidelines apply irrespective of the number of speakers in your
sound system: speakers positioned to the right must be connected to the
amplifier output terminal marked "R" or "Right", and any to the left must
be connected to "L" or "Left".
You must ensure that the cable ends are
firmly pushed into the terminals, and
that there are no loose wires, which
could cause a short circuit and damage
the amplifier. (Fig. 2)
Fig. 2. Terminal connection
Once you have connected your new DALI Concept speakers, you need to
begin the process of searching for the perfect location for the speakers in
relation to your listening position - and adjusting the surround amplifier,
if applicable. It is worth spending a little time experimenting, as the cor-
rect set-up and tuning will provide a significantly better sound experience.
Here are some useful pieces of advice:
Avoid placing objects between the speakers and your listening position, as
obstructions can cause incorrect tonal balance.
Try to ensure that the distance between the left and right speakers is equal
to the distance from your listening position to the speakers (Fig. 3). If you
have surround sound, the distance between all the speakers should be sym-
metrically identical.
Fig. 3. Stereo positioning
Positioning
To Next Page
Loading...
