Need help?Do you have a question about the Dali CONCEPT 1 and is the answer not in the manual?
General| Sensitivity | 86 dB |
|---|---|
| Nominal Impedance | 8 ohms |
| Recommended Amplifier Power | 20 - 100 Watts |
| Low Frequency Driver | 5" Wood Fibre Cone |
| Enclosure Type | Bass Reflex |
| Type | 2-way bookshelf speaker |
| High Frequency Driver | 1" soft textile dome |
Critical precautions for operation including water, heat, ventilation, power cord protection, and damage requiring service.
Details connecting left/right speakers to amplifier terminals and ensuring correct phase for optimal sound.
Guidance on placing speakers, avoiding obstructions, and ensuring symmetrical distances from the listening area.
Advice on positioning center and rear speakers for optimal surround experience, including listening position.
Instructions for connecting the Concept SUB to a surround amplifier's subwoofer output terminal (LFE).
Instructions for connecting the Concept SUB to a stereo pre-amplifier's line output for enhanced bass reproduction.
Guidance on adjusting subwoofer volume to match front speakers for a balanced bass response.
How to adjust the crossover setting for a smooth transition between speakers and subwoofer.
Explains phase adjustment, auto stand-by, power functions, and trial-and-error tuning methods.
To Next Page
