43
FIGURE 3
DALI SUB E-12F
Frequency Range [+/- 3] dB [Hz] 28 - 190
Input Impedance [kohm] 25
Maximum SPL [dB] 112
Crossover Frequencies [Hz] 40 - 120
Low Frequency Driver(s) 1 x 12” long stroke
Enclosure Type Bass reflex
Bass Reflex Tuning Frequency [Hz] 36.0
Connection Input(s) RCA, Stereo (low-pass filtered) LFE (Mono)
Recommended Placement Floor, near wall or corner
Magnetic Shielding No
Max. Amplifier Power Output [RMS Watts] 220
Continous IEC Power Output [RMS Watts] 170
Max. Power Consumption [Watts] 250
Dimensions (H x W x D) [mm] 370 x 340 x 380
Dimensions (H x W x D) [inches] 14.6 x 13.4 x 15.0
Weight [kg/lb] 15.3/33.7
TABLE 2 - DALI SUB E-12F TECHNICAL SPECIFICATIONS
29
All technical specifications are subject to change without notice.
I C
F
H
LINE INPUTLFE
R
L
P/N: 360137-0-0FOR INDOOR USE ONLY
CAUTION
WARNING: SHOCK HAZARD-DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
DALI A/S, Dali Allé 1, DK-9610 Nørager, Denmark | Designed and engineered in Denmark by DALI A/S
POWER
ON OFF
220-240V~ 250W 50/60Hz
T
RISK OF FIRE
REPLACE FUSE AS MARKED
1.6AL/250V, 230V~
Danish Audiophile Loudspeaker Industries
VOLUMECROSSOVER
MIN MAX40Hz 120Hz
PHASE
OFF
ON
POWER MODE
80Hz
AUTO
0˚
180˚
CAUTION
DISCONNECT SUPPLY CORD BEFORE REPLACING FUSE.
FOR CONTINUED PROTECTION AGAINST RISK OF FIRE
REPLACE ONLY WITH SAME TYPE FUSE.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
B A E D
G
To Next Page
Loading...
