Like any other mechanical system, a speaker needs to be "run in", so you
can look forward to a gradual improvement in sound quality over the ini-
tial period. Unlike other mechanical systems, a DALI speaker does not wear
out - in fact, regular use will extend its lifetime.
The connection to your ampli er is extremely important for your sound
Always turn off your ampli er before connecting any cables or altering
Always use cables of the same type and length for left and right speakers.
We recommend using special speaker cables from DALI, available from
For the perfect sound experience, the right speaker must be connected to
the output terminal marked "R" or "Right" on your ampli er and the left
speaker to the terminal marked "L" or "Left".
A detail that is often overlooked is connection in the correct phase, i.e. the
red terminal (+) on the ampli er should be connected to the red terminal
(+) on the speaker, and the black terminal
(-) on the ampli er should be connected
to the black terminal (-) on the speaker.
(Fig. 1) If just one speaker in a stereo or
surround sound system is not connected in
phase, the bass will be weak and the over-
all sound will be diffuse.
Fig. 1. Stereo connection
Talk to your authorised DALI dealer about cables - or visit www.dali.dk
To Next Page
Loading...
Need help?
General
