17 DAMPERS
DAMPER DIMENSIONS
Standard dampers are new: KONI 2812-925. Front and rear have the same open length and
identical installation parts. Damper assembly dimensions are:
mm
full open length 315
full closed length FRONT 279
REAR 276
Stroke FRONT 36
REAR 39
On Koni dampers you should always use the 3mm Teflon spacer on front mono assembly to
prevent the rocker to lock. If you plan to use alternative dampers check that maximum stroke to be
no more than 36 mm for a front mono damper and 39mm for all others.
To Next Page
Loading...
