Danalogic i-FIT RIE - User Manual

48 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

User Guide

Behind-the-ear (BTE) models:

Danalogic i-FIT 71, 81

and Receiver-in-the-ear (RIE)

Questions and Answers

J
juanjohnsonAug 8, 2025
Why Danalogic i-FIT RIE has no sound?
- G
  ghernandezAug 8, 2025
  Your Danalogic Hearing Aid may not be producing sound for several reasons. First, ensure the device is turned on by closing the battery door. If that doesn't work, the battery may be dead and needs replacing. Also, check if the battery is inserted properly, allowing the battery door to close. The earmould or tube might be blocked, requiring cleaning. Finally, the wax filter could be blocked, in which case you should replace it.
M
Mrs. Annette AguirreAug 18, 2025
What to do if Danalogic i-FIT RIE is whistling?
- W
  wintersbrandonAug 18, 2025
  If your Danalogic Hearing Aid is producing excessive whistling or feedback, it could be due to incorrect earmould placement; try re-inserting it carefully. Another cause might be incorrect dome placement, so ensure that the dome is properly re-inserted.
K
Kenneth StephensonAug 28, 2025
How to make Danalogic Hearing Aid louder?
- H
  Heather HarperAug 28, 2025
  If your Danalogic Hearing Aid isn't loud enough, start by reinserting the earmould to ensure correct placement. Also, check for blockages in the earmould or dome, and clean the earmould or replace the dome or filter if necessary. Finally, check the volume control and increase it if available.

Summary

Getting started

Inserting;Replacing the battery

Provides step-by-step instructions for inserting and replacing batteries in the hearing instrument.

Low battery indicator

Inserting;Removing hearing instruments

Guides users on how to properly insert and remove hearing instruments from the ear.

Operation of the hearing instrument

Volume control

Programme button

Care and maintenance

Proper handling

Daily maintenance

Cleaning earmoulds

Cleaning thin tubes and domes

Cleaning receiver tubing and domes

How to apply domes

Instructions on how to correctly attach domes to the sound tube for proper fit.

Replacing the wax filter (receiver in-the-ear models)

General precautions

General warnings

Battery warning information

Troubleshooting: No sound

Troubleshooting: Not loud enough

Troubleshooting: Excessive whistling;feedback

Troubleshooting: Sound distorted; not clear

Warranty and repairs

Danalogic i-FIT RIE Specifications

General

Brand	Danalogic
Model	i-FIT RIE
Category	Hearing Aid
Language	English

Related product manuals

Preview: Danalogic i-FIT 71

Danalogic i-FIT 71

Danalogic i-FIT 81

Danalogic Ambio