Danby DAC080EB2GDB User Manual

Operating Instructions
9
Operation starts when
this button is pressed
and stops when the
button
NOTE:The unit will automa-
tically launch the Energy
Saver function when it is in
Cool, Dry, and Auto modes
(Auto-Cool and Auto-Fan
modes).
is pressed again.
Push this button to
increase the tempera-
ture setting in 1°C
increments to 30°C.
Used to select the fan
speed in four steps:
Press this button to
activate the Energy sav-
ing mode. Press it again
to
stop the function.
Each time you press
this button, a mode is
selected in a sequence
that consists of Auto,
Cool, Dry, Fan, and
back to Auto.
Push this button to
decrease the indoor
temperature setting in
1°C increments to 17°C.
Push this button to
activate the “Auto
Start” or “Auto Stop”
program from 0-24
hours
Press this button to
activate the Sleep
mode. This function is
available in Cool, and
Auto modes only, and
maintains the most
comfortable temperature
for you.
LOW
MED
HIGH AUTO
(0.5/1 hour increments)
REMOTE
CONTROLLER
BUTTONS
This function is available in
Cool, Dry, and Auto modes
(only Auto-Cool and Auto-
Fan modes).
ON/OFF button
TEMP UP button
FAN button
ENERGY SAVER
button
MODE button
TEMP DOWN button
TIMER button
SLEEP button
Model:
R15B

Danby DAC080EB2GDB Specifications

General

Brand	Danby
Model	DAC080EB2GDB
Category	Air Conditioner
Language	English