To Next PageTo Next PageWhat to do if my Danby DAC050MB1WDB will not turn on?
If your Danby Air Conditioner isn't working, first ensure the plug is fully inserted into the wall outlet. Also, check for a blown fuse or tripped circuit breaker and replace or reset it as necessary.
Why is my Danby DAC050MB1WDB Air Conditioner dripping water outside?
It's normal for Danby Air Conditioners to drip water from the back on very hot or humid days.
What to do if my Danby Air Conditioner is dripping water inside?
If your Danby Air Conditioner is dripping water inside, reposition it to ensure it is properly angled for drainage to the outside.
Why is my Danby Air Conditioner not cooling enough?
If your Danby Air Conditioner isn't cooling sufficiently, it might be due to a dirty air filter. Try cleaning or replacing it. Also, make sure that nothing is blocking the airflow around the unit. Finally, the unit may be too small for the room; consider using a larger air conditioner.
How to reduce noise from my Danby DAC050MB1WDB Air Conditioner?
To reduce noise from your Danby Air Conditioner, ensure that it is properly supported in the window installation.
How to eliminate odors from my Danby DAC050MB1WDB?
To eliminate odors from your Danby Air Conditioner, place an algaecide tablet in the base pan. Push the tablet through the grill on either side of the appliance to address potential mold or mildew formation on internal wet surfaces.
What to do if there is frost build up in my Danby DAC050MB1WDB?
If you notice frost build-up in your Danby Air Conditioner, especially when outdoor temperatures are below 18.3°C (65°F), switch the appliance to fan-only mode until the frost melts.
General| Type | Window Air Conditioner |
|---|---|
| Cooling Capacity | 5, 000 BTU |
| Room Size Coverage | Up to 150 sq. ft. |
| Noise Level | 52 dB |
| Weight | 37.5 lbs |
| Coverage Area | 150 sq. ft. |
| Fan Speeds | 3 |
| Control Type | Mechanical |
| Refrigerant | R410A |
| Voltage | 115V |
| Room Coverage | 150 sq. ft. |
| Power Supply | 115V/60Hz |
| Energy Efficiency Ratio (EER) | 12.1 |
| EER | 12.1 |
| Height | 16 inches |
| Warranty | 1 Year |
Outlines essential safety precautions for product operation and handling.
Details proper grounding procedures to prevent electrical shock hazards.
Covers safe practices for maintenance, repair, and refrigerant management.
Addresses ignition risks, ventilation needs, and fire extinguisher requirements.
Focuses on safety checks for electrical components and repair procedures.
Guidelines for safe cabling and methods for detecting flammable refrigerants.
