Danby DAC050MB1WDB - Operating Instructions

10
OPERATING INSTRUCTIONS
FEATURES
1. Control Panel
2. Interior Air Inlet
3. Interior Air Outlet
4. Exterior Air Inlet
5. Air Filter (not pictured)
CONTROL PANEL
1. Thermostat dial: Used to choose the level of
cooling.
• The lower numbers indicate warmer settings.
• The higher numbers indicate colder settings.
2. Program selector dial: Used to select which
program the appliance will run.
3. Low fan: This setting will circulate air at low
speed without engaging the cooling function.
4. Off/Arrêt: This setting will turn the appliance
off.
5. High fan: This setting will circulate air at a high
speed without engaging the cooling function.
6. High cool: This setting will provide cooling with
high fan speed.
7. Low cool: This setting will provide cooling with
low fan speed.
Note: Wait three minutes when switching programs
to allow the appliance to adjust.
4
2
1
3
17
2
3
4
5
6
Off
Arrêt
1
2
3
4
5
6
7