EasyManua.ls Logo

Danby DBM187E1WDB - Troubleshooting Common Issues; Power and Temperature Problems; Operational Noises and Fault Codes

Danby DBM187E1WDB
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TROUBLESHOOTING
No power
• A fuse may be blown or the circuit breaker tripped
• Plug not fully inserted into the wall outlet
Internal temperature not cold enough
• Temperature setting is too warm
• The door is not shut properly or opened excessively
• Recently added a large quantity of warm food to the cabinet
• Close proximity to heat source or direct sunlight
• Ambient temperature or humidity is very high
Refrigerator runs continuously
• Temperature setting is too cold
• The door is not shut properly or opened excessively
• Recently added a large quantity of warm food to the cabinet
• Close proximity to heat source or direct sunlight
• Ambient temperature or humidity is very high
Refrigerator makes a gurgling noise when operating
• This noise is completely normal. The refrigerant inside the appliance will make a gurgling noise as it
changes from a liquid to a gas and back again.
FAULT CODES
E1 or LED1/LED2 fl ashing
• refrigerator temperature sensor fault
E2 or LED1/LED5 fl ashing
• freezer temperature sensor fault
E5 or LED1/LED3 fl ashing
• freezer defrost sensor fault
E6 or LED2/LED4 fl ashing
• communication failure
E7 or LED1/LED4 fl ashing
• ambient temperature sensor fault
9
Danby DBM187E1WDB - Troubleshooting Common Issues; Power and Temperature Problems; Operational Noises and Fault Codes