To Next PageTo Next PageWhat to do if my Danby DDR050BGWDB will not operate?
If your Danby Dehumidifier isn't working, make sure the plug is fully inserted into the wall outlet. Also, check for a blown fuse or tripped circuit breaker. Ensure that the ambient humidity is higher than the set humidity. Lastly, verify that the bucket is not full and is correctly positioned.
What to do if I see water on the floor near my Danby Dehumidifier?
If you find water on the floor near your Danby Dehumidifier, check if the hose connection is loose. Also, make sure the drain cover hasn't been removed.
Why is my Danby Dehumidifier not dehumidifying enough?
If your Danby Dehumidifier isn't dehumidifying sufficiently, check if the air filter is dirty. Also, ensure that the airflow isn't blocked. Consider whether the appliance size is appropriate for the room. The unit will not dehumidify if the ambient humidity is lower than the set humidity.
Why is there frost build up on my Danby DDR050BGWDB?
Frost may form on your Danby Dehumidifier when the ambient temperature is below 5°C (41°F). Switch the appliance to fan only mode until the frost melts.
How to reduce noise from my Danby DDR050BGWDB Dehumidifier?
To reduce noise from your Danby Dehumidifier, check if the air filter is dirty. Ensure that the bucket is in the proper position. Also, make sure the floor surface is level.
How to get rid of odors from my Danby DDR050BGWDB Dehumidifier?
Odors from your Danby Dehumidifier may be due to the formation of mold or mildew on internal wet surfaces. To address this, place an algaecide tablet in the water bucket.
General| Model | DDR050BGWDB |
|---|---|
| Capacity | 50 pints per day |
| Energy Star Rated | Yes |
| Noise Level | 51 dB |
| Filter Type | Washable filter |
| Auto Restart | Yes |
| Continuous Drain Option | Yes |
| Refrigerant | R410A |
| Operating Temperature | 41°F to 95°F |
| Voltage | 115 V / 60 Hz |
| Color | White |
| Drainage | Gravity drain |
General safety guidelines for appliance operation and user supervision.
Proper grounding procedures to prevent electrical shock hazards.
Guidance on optimal placement and clearance for efficient dehumidifier operation.
Identification and description of the front and back components of the appliance.
Detailed explanation of buttons, indicators, and display settings on the control panel.
How to set auto-on and auto-off timers for automated operation.
Procedures for emptying the water bucket and using the continuous drain option.
Instructions for cleaning and replacing the air filter to ensure performance.
Guidelines for safely cleaning the appliance's exterior and internal ports.
Steps for preparing the unit for storage and proper disposal guidelines.
Identifies common problems and their potential causes and resolutions.
Outlines the duration, coverage, limitations, and exclusions of the product warranty.
