Do you have a question about the Danby DDR4510E and is the answer not in the manual?
Brand | Danby |
---|---|
Model | DDR4510E |
Category | Dehumidifier |
Language | English |
Ensure wiring and grounding conform to electrical codes and qualified electrician checks power availability.
Proper grounding reduces shock risk; use a 3-prong plug and a properly installed, grounded outlet.
Select a suitable location near an outlet, ensuring at least 20cm clearance for proper airflow.
Displays ambient or set relative humidity, toggled by humidity adjustment buttons.
Turns the unit on or off; the indicator light shows the operational status.
Runs the unit non-stop, bypassing humidity settings for continuous dehumidification.
Adjusts the relative humidity setting incrementally by 5% (35%-80%).
Selects between high and low fan speeds; an indicator light confirms the active setting.
Red light signals a full tank or improper placement, automatically shutting down the unit.
Unit retains the last program setting after power interruptions or manual switch-offs.