To Next PageTo Next PageWhat to do if water doesn’t pump out of my Danby DDW1899WP?
If water isn’t pumping out of your Danby Dishwasher, the drain might be clogged. Check to make sure your kitchen sink is draining properly. If your dishwasher drains into a disposer, run it to clear any blockage.
Why my Danby DDW1899WP doesn’t run?
Your Danby Dishwasher might not be running due to several reasons. First, check if a fuse has blown or a circuit breaker has tripped and replace the fuse or reset the circuit breaker if needed. Also, ensure that the dishwasher is turned on, the door is closed properly, and the power cord is securely plugged in. Low water pressure could also be the cause, so verify that the water supply is connected and turned on.
Why aren't my dishes clean in my Danby DDW1899WP Dishwasher (spots/filming)?
If your dishes and flatware aren't coming out clean with spots or filming, it could be due to a few reasons. Ensure you've selected a strong enough wash program. Also, check that you're loading the racks properly, making sure large dishware isn't blocking the detergent dispenser or spray arms. If you have extremely hard water, remove all metal utensils from the dishwasher.
Why is my Danby Dishwasher leaking or steaming?
If your Danby Dishwasher is leaking or steaming, it could be due to a few reasons. Be careful not to overfill the rinse aid dispenser, as spilled rinse aid can cause oversudsing and overflowing; wipe away any spills immediately with a damp cloth. Also, ensure the dishwasher is level. Note that some steam coming through the vent by the door latch is normal during drying and water draining.
How to get rid of suds in my Danby DDW1899WP Dishwasher?
To get rid of suds in your Danby Dishwasher, make sure you're only using dishwasher detergent to prevent suds from forming. If suds are already present, open the door and allow them to evaporate.
Why is my Danby DDW1899WP Dishwasher so noisy?
Some noise is normal during the operation of your Danby Dishwasher, such as sounds from soft food shredding and the detergent cup opening. However, excessive noise could be due to utensils not being secure in the basket or small items dropping into it; make sure everything is secured properly. If the motor hums, especially if the dishwasher isn't used often, remember to fill and pump out the appliance every week to keep the seal moist.
Why aren't dishes dry after using my Danby Dishwasher?
If your dishes aren't drying in your Danby Dishwasher, check to ensure that the rinse agent dispenser is filled.
Why is detergent left in the dispenser cups of my Danby DDW1899WP Dishwasher?
If you find detergent left in the dispenser cups of your Danby Dishwasher, it's likely that dishes are blocking the detergent cups. Re-load the dishes properly to avoid this issue.
Why doesn't the drain pump stop in my Danby Dishwasher?
The drain pump in your Danby Dishwasher might not stop if the system detects an overflow. This is a designed safety feature that shuts off the circulation pump and turns on the drain pump when an overflow is detected.
General| Capacity | 8 Place Settings |
|---|---|
| Wash Cycles | 6 |
| Energy Star Rated | Yes |
| Noise Level | 52 dBA |
| Control Type | Electronic |
| Color | White |
| Type | Built-in |
| Place Settings | 8 |
| Voltage | 120V |
| Water Consumption | 3.5 gallons |
| Dimensions (H x W x D) | 22.5 inches |
Details electrical requirements and grounding for safe operation of the appliance.
Explains the importance and procedure of grounding for electrical safety and shock prevention.
Manages water hardness using salt to prevent deposits and improve performance.
Details proper use, filling, and adjustment of detergent and rinse aid dispensers.
Guidelines for loading upper and lower racks and silverware for optimal cleaning.
Covers turning on, starting, cancelling cycles, and adding forgotten dishes.
Information on cleaning the main, coarse, and fine filters for optimal operation.
Steps to protect the dishwasher from freezing damage during winter storage.
Instructions for cleaning spray arms, filters, and door for optimal performance.
Advice on daily care, holiday preparation, and seal maintenance.
Details the first year of coverage, service acquisition, and service area limitations.
Lists conditions and events that are not covered by the warranty.
Outlines general conditions and causes that void the warranty.
