EasyManua.ls Logo

Danby DDW2404EBSS - Troubleshooting

Danby DDW2404EBSS
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PROBLEM POSSIBLE CAUSE
No power • A fuse may be blown or the circuit breaker tripped
• Power surge
• Plug not fully inserted into the wall outlet
• Door not closed correctly
Water not drained from dishwasher • Kink in drain hose
• Filter clogged
• Drain pump malfunction
Detergent left in the dispenser • Dishes blocking dispenser from fully opening; unit may be
over loaded
Suds left in the appliance • Too much detergent or wrong kind of detergent
• Too much rinse aid
White fi lm or cloudiness on dishes or
interior tub
• Hard water minerals
• Too much detergent
• Not enough rinse aid
Noise inside the tub while running • The spray arm is hitting an item in the basket
• An item has fallen out of the basket and is on the bottom of
the wash tub
Dishes are not clean • Dishes were loaded incorrectly
• The wash program was not powerful enough
• Not enough detergent
• Items are blocking the spray arm; unit may be over loaded
• Filter clogged
Dishes are not drying • Dishes were loaded incorrectly
• Too many dishes were loaded
• Not enough rinse aid
• Dishes removed too quickly
Danby Consumer Care: 1-800-263-2629
Hours of operation:
Monday to Thursday 8:30 am - 6:00 pm Eastern Standard Time
Friday 8:30 am - 4:00 pm Eastern Standard Time
Information in this manual is subject to change without notice.
TROUBLESHOOTING
13