To Next PageTo Next PageWhy is my Danby Air Conditioner not cooling properly?
If your Danby Air Conditioner isn't cooling enough, the air filter might be dirty, there could be blocked airflow, or the appliance might be too small for the room. Check these potential issues to improve cooling performance.
How to fix a Danby DTAC100F1WDB Air Conditioner that won't turn on?
If your Danby Air Conditioner won't turn on, make sure the plug is fully inserted into the wall outlet. Also, check your fuse box or circuit breaker, as a blown fuse or tripped breaker could be the cause.
Why is my Danby DTAC100F1WDB Air Conditioner dripping water outside?
If you notice water dripping from the back of your Danby Air Conditioner, especially on hot or humid days, it's usually normal. No action is required.
How to get rid of odors from my Danby DTAC100F1WDB?
If your Danby Air Conditioner is emitting odors, it might be due to mold or mildew forming on internal wet surfaces. To resolve this, place an algaecide tablet in the base pan by pushing it through the grill on either side of the appliance.
What to do if my Danby DTAC100F1WDB is dripping water inside?
If water is dripping inside your Danby Air Conditioner, it might not be properly angled to allow water to drain outside. Adjust the angle to facilitate proper drainage.
How to reduce noise from my Danby DTAC100F1WDB Air Conditioner?
If your Danby Air Conditioner is making excessive noise, it might be due to inadequate support in the window installation. Ensure the unit is properly and securely supported.
General| Type | Portable Air Conditioner |
|---|---|
| Cooling Capacity | 10, 000 BTU |
| Coverage Area | 450 sq. ft. |
| Power Supply | 115V/60Hz |
| Refrigerant | R410A |
| Fan Speeds | 3 |
| Control Type | Electronic |
| Remote Control | Yes |
| Filter Type | Washable |
| Noise Level | 52 dB |
| Features | Sleep mode, Auto restart |
